Ways To Find Hidden Water Leaks

By StevenGadson

A water leak early detection can help you save money and avoid potential disaster. These are signs that you might have a water leak. You should contact a plumber to repair it.

Make sure you have a water meter.

Alpha Tradesmen Academy online program is unique among other trade schools. It combines online-based learning with field-based experience to provide a holistic technical education. Checking the water meter is one of the best ways you can tell if there’s a leak in your plumbing. First, turn off the water supply to your home. Turn off all water faucets and ensure that the washing machine and dishwasher are turned off. Next, check the meter to see if it changes. If the meter changes rapidly, it is likely that you have a leaky pipe. If the meter does not change within two hours, wait until it changes again. It could be a slow leak if the meter does not change despite water being off. It could be located anywhere beyond the meter or underground. All piping that runs after the meter is the homeowner’s responsibility.

Take a look at how you use it

According to the U.S. Environmental Protection Agency, you should check your winter water consumption to determine if there is a leak in your home. A serious problem in your plumbing system could be found if a family of four uses more than 12,000 gallons per month.

Keep an eye on your bill

A leak could be the reason your water bill keeps rising, but your water usage habits haven’t changed. Compare the bills for the last few months to determine if there has been an increase in your bill. Your water bill should not change from month to month. Keep in mind that your pipes might be underground. Although you may not be able to see leaks in this area of your system, they will still be there and you will pay for them. A professional plumber should inspect all pipes. Professional attention is needed if there is a warm spot in the floor (under slab piping) and if water runs.

See also  Top Plumbing Tips

Get some food coloring

Your toilets could account for as much as 30% of your water consumption, so make sure you check that they are working properly. Add a few drops food coloring to the tank of your toilet and let it sit for 10 minutes. If you see the color in your bowl, it is likely that there is a leak. This allows water to flow from your tank to your drain without having to flush the bowl.

Check exterior usage

Leaks can occur anywhere, not just inside your home. Attach a gardenhose to your outside spigots. If water seeps through the connection during hose running, replace rubber hose gasket. Also check that all connections are tight. If you have an irrigation system, it is worth calling a professional to inspect it once a year. Even a tiny leak can cause your irrigation system to waste 6,300 gallons per month.

Make use of common sense

Regularly inspect the under basins and backs of cabinets for signs of mold. This could help you save thousands of dollars in repairs. To check for potential problems or leaks, consider having a professional plumber inspect your home annually.